Park Mill Colliery

LocationClayton West, near Huddersfield, Kirklees, West Yorkshire — 53.6017, -1.6108 (exact)
CommodityCoal
TypeCoal
Workedc. 1850-1860–1989
Maximum depth85 yd (78 m), Springwood shaft
OperatorsStringer and Son Ltd (?–1947, owner) — E. Stringer and Son, then Stringer and Son Ltd (DMM)
National Coal Board (1947–1989) — 214,000 tons with 610 men in 1947 (DMM)

The village pit of Clayton West, near Huddersfield, an early user of coal-cutting machines in 1880, worked by Stringer and Son and then the National Coal Board for more than a hundred years until it closed in 1989.

Location

Recorded location. The large pin is this mine; the small round markers are the nearest mines on record. Click one for its page. View on full map

History

Park Mill Colliery was the village pit of Clayton West, about six and a half miles west-north-west of Barnsley, in a Dearne Valley that already had eleven coal mines by 1865. It was established in the 1850s or 1860s, or by another account in 1877. The colliery pioneered coal-cutting machines in 1880. It was owned by E. Stringer and Son, later Stringer and Son Ltd, and employed 551 in 1894, 844 in 1900 and 787 in 1923, working the Silkstone, Wheatley Lime and New Hards seams. About twenty deaths are recorded there between 1895 and 1927.

The National Coal Board took over in 1947, when 610 men raised 214,000 tons of coking, gas, household and steam coal. By the 1960s the colliery was served by two shafts about a mile apart, Park Mill, sunk in 1891 to 73 yards, and Springwood, 85 yards deep, and by three drifts, one of them carrying coal up from the underground locomotive level; 310 men were then producing 143,000 tons a year from the Wheatley Lime. Plans record the New Hards abandoned in 1966, the Wheatley Lime in 1971, the Flockton Thick and Thin in 1974 and 1981, and the Fenton and every remaining seam in 1986. Somewhat bypassed by the miners' strike of 1984-85, Park Mill closed in 1989, though closure may have come in 1990.

Geology

The Yorkshire coal measures: the Silkstone, Wheatley Lime (Silkstone Four Foot), New Hards, Flockton Thick and Thin, and Top and Low Fenton seams.

Workings

Two shafts about a mile apart, Park Mill (73 yards, sunk 1891) and Springwood (85 yards), and three drifts at 1 in 3.75, one used to convey coal from the underground locomotive horizon.

Closure

The remaining seams were abandoned in September 1986 and the colliery closed in 1989, or possibly 1990.

Related mines

Nearby mines

Straight-line distance, within 9 miles (15 km). Show on the map.

Further reading

Park Mill Colliery, Durham Mining Museum (reference)

Owners, output, employment, seams and shafts, with the 1967 NCB summary.

View source
Yorkshire mines from 1854, P-S, Northern Mine Research Society (reference)

Working dates for Park Mill and its early use of coal cutters.

View source

Sources

  1. (primary) Park Mill Colliery (Durham Mining Museum) — Durham Mining Museum
  2. (secondary) Mines of coal and other stratified minerals in Yorkshire from 1854: Mines P-S (Northern Mine Research Society) — Northern Mine Research Society
  3. (primary) BGS mine plan: PARK MILL, all seams Horizon Mine to below Whinmoor, abandoned 1986 — British Geological Survey
  4. (primary) BGS mine plan: PARK MILL, New Hards, abandoned 1930 — British Geological Survey
  5. (secondary) Clayton West — Wikipedia

Record created: 5 November 2026 · Last researched: 6 November 2026

Accessibility options

Saved in this browser and applied on every page. Colour is never the only cue on MineArchive; if links are hard to pick out, underline them or raise the contrast. For larger text, use your browser's zoom.

Contrast
Link visibility
Motion
Reading width