Windy Mine
| Also known as | Cheetham's Engine |
|---|---|
| Location | Hartle Moor, west of Bradwell, Derbyshire — 53.3226, -1.7574 (approximate) |
| Commodity | Lead |
| Type | Metal |
| Worked | from before 1842 |
| Maximum depth | 300 feet (engine shaft) |
A lead mine on Moss Rake at Hartle Moor near Bradwell, first noted as Cheetham's Engine in 1842, whose 300-foot engine shaft was surveyed in 1937 and 1938.
Location
Approximate location. The large pin is this mine; the small round markers are the nearest mines on record. Click one for its page. View on full map
History
Windy Mine stood on Hartle Moor, west of Bradwell, on the stretch of Moss Rake known there as Hartle Moor Vein. It started life as Cheetham's Engine, which the Bradwell Barmaster noted on Moss Rake in 1842, and only later took the name Windy Mine. The Barmaster's map puts it immediately west of Ripper Mine. It may be a good deal older. In 1749 William Cheetham had to forfeit a break vein he had freed incorrectly at his mine on Hartle Dale Old Rake, part of Moss Rake, and the Grand Jury was called out to view the mine. That mine could have been Cheetham's Engine, though where it stood is unclear. No later freeings at Windy Mine are known.
The engine shaft was surveyed between November 1937 and February 1938, and the section drawn by S. Davison of Sheffield shows it 300 feet deep, reaching a series of stopes and headings driven east and west along Moss Rake. At that depth a level ran 100 feet west from the shaft before ending at a roof fall. It was well built and roofed, and its mud floor still held the imprints of miners' boots. Initials, the date 1859 and the carved 'No 18' had been cut near its entrance, and the surveyors found a rusted miner's drinking can and two rusted iron wheels in the level. Above ground nothing is left: opencast mining and hillock reworking have removed every trace of the mine.
Geology
Moss Rake, called Hartle Moor Vein on Hartle Moor, a major east-west vein in the limestone west of Bradwell. The mine worked lead ore.
Workings
An engine shaft 300 feet deep, with stopes and headings driven east and west along Moss Rake, and a well-built, roofed level driven 100 feet west from the shaft bottom to a roof fall.
What remains
Nothing of the mine survives at the surface: the ground has been opencast and its hillocks reworked.
None.
Redevelopment
The site has been opencast and its hillocks removed.
Related mines
- Bank Top Mine — Same vein: both are on Hartle Moor Vein (Moss Rake), Bank Top a little to the west.
- Moss Rake — Works the same vein: Windy Mine is on Moss Rake, called Hartle Moor Vein on Hartle Moor.
- Outland Head Mine — Same vein: both are on Hartle Moor Vein (Moss Rake), Outland Head to the east.
Nearby mines
- Bank Top Mine — 0.1 miles (0.1 km) W
- Hartle Dale Bottom Mine — 0.2 miles (0.3 km) W
- Outland Head Mine — 0.3 miles (0.4 km) E
- Bird Mine — 0.5 miles (0.7 km) NW
- Chance Mine — 0.4 miles (0.7 km) SW
Straight-line distance, within 9 miles (15 km). Show on the map.
Further reading
The society's history and gazetteer of the Bradwell lead mines, with Cheetham's Engine, Windy Mine's position on the Barmaster's map and the 1937-38 section of its engine shaft.
View sourceThe national catalogue entry for the plan and sections of Windy Mine surveyed between November 1937 and February 1938 (PDMHS plan C43).
View sourceSources
- (primary) A History and Gazetteer of the Lead Mines within Bradwell Liberty (Bulletin 17-5) — Peak District Mines Historical Society / J.H. Rieuwerts
- (primary) BGS mine plans: WINDY LEAD MINE ENGINE SHAFT MOSS RAKE BRADWELL DERBYSHIRE — British Geological Survey
Record created: 19 November 2026 · Last researched: 19 November 2026