Long Rake Mine
| Also known as | Long Rake Founder Shaft |
|---|---|
| Location | Long Rake, Bradwell Moor, near Batham Pot, Derbyshire — 53.3254, -1.7690 (approximate) |
| Commodity | Lead |
| Type | Metal |
| Worked | from c. 1670 |
| Maximum depth | About 150 m |
A lead mine on Long Rake, Bradwell Moor, worked since about 1670 beside a natural pothole known in the 1670s as the Shack Pit, with underground washing floors.
Location
Approximate location. The large pin is this mine; the small round markers are the nearest mines on record. Click one for its page. View on full map
History
Long Rake Mine, also known as the Long Rake Founder Shaft, works the western range of Long Rake on Bradwell Moor, near the natural pothole called Batham Pot. Long Rake is the principal vein of the area, running from Nunlow and Gautries Low westward across Bradwell Moor to meet Moss Rake near Raddlepits Mine. The mine has been worked since about 1670, and a large natural cavity at the surface was already called the Shack Pit in the 1670s. A Barmote Court case of early 1673 may refer to this stretch of the rake: Francis Bennett, Richard Torre and Robert Durham accused Richard and Thomas Wragg of entering their first taker meer at the Lord's meer near 'ye Shackpitt' and carrying away a hundred loads of ore worth £100. The jury found for the plaintiffs.
The old workings are extensive and in places unspoilt. They take in natural cavities, and underground the miners built washing floors and turned streams aside. The explored workings go down about 150 metres. At the surface, the western end of Long Rake has been opencast and its hillocks removed.
Geology
Long Rake, the principal north-east to south-west vein of the Bradwell area, in the Carboniferous limestone, crossing natural cavities including the pothole now called Batham Pot; the mine worked galena.
Workings
A founder shaft leads to extensive, very old workings incorporating natural cavities, with underground washing floors and underground streams diverted by the miners. The explored workings are about 150 metres deep.
What remains
The surface features of the western end of Long Rake have been removed by opencast mining and hillocking; the underground workings survive.
The shaft, and Batham Pot, a natural pothole on the rake.
Redevelopment
The western end of the rake has been opencast and its hillocks reworked.
Related mines
- Bird Mine — Long Rake Mine and Bird Mine work the same vein, Long Rake on Bradwell Moor; Bird Mine stands where the rake divides, east of Long Rake Mine.
Nearby mines
- Bird Mine — 0.2 miles (0.4 km) NE
- Hartle Dale Bottom Mine — 0.4 miles (0.6 km) SE
- Bank Top Mine — 0.5 miles (0.7 km) SE
- Windy Mine — 0.5 miles (0.8 km) E
- Chance Mine — 0.7 miles (1.1 km) SE
Straight-line distance, within 9 miles (15 km). Show on the map.
Further reading
The county record of the Long Rake workings on Bradwell Moor, with their natural cavities and underground washing floors.
View sourceThe society's history and gazetteer of the Bradwell lead mines, with the course of Long Rake and the 1673 Shackpitt case.
View sourceThe caving register's entry for the mine, also known as the Long Rake Founder Shaft, with the depth of its workings.
View sourceSources
- (secondary) MDR2379 - Lead working (and Long Rake Mine), north of Potter Barn, Bradwell — Derbyshire Historic Environment Record
- (primary) A History and Gazetteer of the Lead Mines within Bradwell Liberty (Bulletin 17-5) — Peak District Mines Historical Society / J.H. Rieuwerts
- (observational) Long Rake Mine (Peak District Caving) — Peak District Caving
Record created: 14 November 2026 · Last researched: 14 November 2026