Pim Hill Mine

Also known asPymhill Mine, Harmer Hill Mine
LocationPim Hill, near Harmer Hill, Shropshire
CommodityCopper
TypeMetal
Worked17th century–1870s
OperatorsAbraham Darby I (1710–?, lessee) — Abraham Darby and Co. of Bristol; 14-year lease of 1 May 1710 from the Countess of Bridgewater, on behalf of a Bristol company; very little mining resulted

A small copper mine on Pim Hill near Harmer Hill, north of Shrewsbury, leased to Abraham Darby's Bristol partners in 1710 and worked hardest in the 1860s.

History

Pim Hill, also written Pymhill, is a sandstone escarpment north of Shrewsbury near the village of Harmer Hill, and copper was worked along a fault running north to south through it. Nobody knows when copper was first found there, but Richard Gough's History of Myddle mentions copper mining near Myddle, about 2.5 km to the north-west, in the early 1640s.

The first documentary evidence is a 14-year lease of 1 May 1710, by which the Countess of Bridgewater allowed Abraham Darby and Co. of Bristol to search for and mine copper and other minerals in the Pymhill and Myddle area. Darby's agreement that year to open a copper mine at Harmer Hill in Myddle was made on behalf of a 'Company of the City of Bristol', and has been linked to the brass works his partners were setting up at Coalbrookdale. Very little mining came of it.

The main working came in the 1860s, as at the other north Shropshire copper mines. A team of 10 to 20 men trenched along the vein, sank three shafts and drove a cross-cut to meet the ore at depth, but work stopped when copper prices collapsed in the 1870s. Prospecting for cobalt in the 1900s found nothing worth working.

Geology

A north-south fault through Pim Hill, with mottled sandstone to the west and waterstones and the upper Keuper sandstone to the east. Malachite, asbolite (cobalt) and vanadium ores occurred along the fault, with extensive baryte veining in the country rock, and cobalt is present in the white sandstones in the northern part of the mine. The vanadium mineral mottramite is recorded from the mine.

Workings

Surface trenching along the vein, three shafts and a cross-cut driven to meet the ore at depth. One surviving shaft, cut in the sandstone, is about 20 m deep to a narrow level that runs north and then curves west to a collapse; a short blind heading runs east. A sandstone entrance arch found about 2 m below the surface may be the cross-cut. Older reports describe a small stope below the present floor of the shaft.

Closure

Work stopped when copper prices collapsed in the 1870s; cobalt exploration in the 1900s was unsuccessful.

What remains

The surviving shaft and its level are partly filled with farm waste and slurry. The workings are a roost for bats, among them lesser horseshoe and Natterer's bats, and bad air has been recorded underground.

Some surface and underground features survive, including a probable filled shaft marked by a depression in a field.

Further reading

Pymhill Copper Mine (Shropshire Caving and Mining Club) (reference)

The club's account of the mine's geology, its 1710 lease and 1860s working, and its exploration of the surviving shaft and level.

View source
Abraham Darby I (Wikipedia) (reference)

The ironmaster's biography, recording his 1710 agreement to open a copper mine at Harmer Hill in Myddle for a Bristol company.

View source

Sources

  1. (secondary) Pymhill Copper Mine — Shropshire Caving and Mining Club
  2. (secondary) Abraham Darby I — Wikipedia
  3. (secondary) Shropshire Copper Mines — Shropshire Caving & Mining Club
  4. (secondary) Pim Hill Mine, Shrewsbury, Shropshire — Albion Fire and Ice

Record created: 14 November 2026 · Last researched: 14 November 2026

Accessibility options

Saved in this browser and applied on every page. Colour is never the only cue on MineArchive; if links are hard to pick out, underline them or raise the contrast. For larger text, use your browser's zoom.

Contrast
Link visibility
Motion
Reading width